Hardware questions
Quick answers about printers, card terminals, scanners, scales, cash drawers and customer displays.
On this page
- Which receipt printers work with BuiltPOS?
- Can I use a USB or Bluetooth printer with an iPad or Android tablet?
- Do I need to set up every till separately?
- Why can't I change the card terminal myself?
- Which card terminals are supported?
- How do I stop using a card terminal on a till?
- My PAX got a new IP address. Do I need support?
- Can the customer add a tip on the card terminal?
- What paper width should I choose?
- The receipt is cut off on the left. What do I do?
- Can kitchen tickets print on the receipt printer?
- Can each kitchen station have its own printer?
- Which label printers work?
- Why does the till ask me to "Use DK-…" before printing labels?
- How does the cash drawer connect?
- Does the drawer open for card sales?
- My scanner works in Notepad but not in BuiltPOS. Why?
- Can I scan with the iPad camera?
- Which scales work?
- Can BuiltPOS read deli and produce scale labels?
- Can I use a second monitor as a customer display?
- The customer display covers my main screen. How do I get it off?
- Can customers enter their phone number for loyalty on the display?
- Do I need special settings on a Sunmi register?
- Can BuiltPOS print on the PAX terminal's printer?
Which receipt printers work with BuiltPOS?#
Thermal (ESC/POS) printers on your network by IP address work on every device. On Windows, any printer installed in Windows works too. Sunmi registers use their built-in printer. See Which hardware works.
Can I use a USB or Bluetooth printer with an iPad or Android tablet?#
No. Tablets print to a network (IP) printer or a Sunmi built-in printer only.
Do I need to set up every till separately?#
Yes. Printers, the cash drawer, the scanner, the scale, the card terminal and the customer display are set per till in Store Management → This Till.
Why can't I change the card terminal myself?#
Setting up a terminal or changing its details is managed by BuiltPOS. Contact BuiltPOS support; they set it up or give you a one-time payment-setup support token. An Owner or Admin can still switch to another terminal that is already set up on the till, or choose Use no card terminal, on the Card Terminals list. See Choose the card terminal for a till.
Which card terminals are supported?#
PAX (A920, A35, S300), Clover (Cloud Pay or Pay Display) and Worldpay triPOS (Cloud or Direct). Verifone and Ingenico take card sales through a local driver that has not been tested with every processor — check with BuiltPOS support before you go live on one.
How do I stop using a card terminal on a till?#
Open Card Terminal and tap Use no card terminal. Card sales then use manual entry; the terminal's settings are kept.
My PAX got a new IP address. Do I need support?#
Not if the PAX was tested on that till before — the till remembers its serial number and looks for it on the network. If that fails, support can use Find PAX on network.
Can the customer add a tip on the card terminal?#
With Clover and Worldpay, yes (Tip prompt → On payment terminal). With PAX, the tip can be asked on the customer display instead, or set up in the PAX's own menu.
What paper width should I choose?#
80mm (Standard) for most counter printers, 58mm (Narrow) for small and handheld printers. It must match the roll in the printer.
The receipt is cut off on the left. What do I do?#
On Windows, use Print alignment test and Move print left / right in Terminal Settings → Printer. See Set up a receipt printer.
Can kitchen tickets print on the receipt printer?#
Yes. In KDS & Kitchen set Kitchen ticket printer to Same as receipt printer.
Can each kitchen station have its own printer?#
Yes. Add a printer per prep station on the Printers page. See Set up kitchen printers.
Which label printers work?#
Brother QL printers with DK rolls on a Windows till, and Zebra (ZPL) or TSC (TSPL) printers on your network. Any printer can print a PDF sheet of labels.
Why does the till ask me to "Use DK-…" before printing labels?#
The roll you picked doesn't match the paper set in the Brother driver. Choosing the driver's roll usually fixes sideways or cut-off labels.
How does the cash drawer connect?#
Into the receipt printer's drawer port with its phone-style cable. The till opens it through the printer.
Does the drawer open for card sales?#
Not by default — only for cash and checks. Change it per payment type in Terminal Settings → Cash Drawer.
My scanner works in Notepad but not in BuiltPOS. Why?#
Check Terminator in Terminal Settings → Barcode Scanner, and turn on Enable global scan capture for a USB scanner.
Can I scan with the iPad camera?#
Yes. Tap the scanner icon in the search bar on the sale screen. The camera stays open so you can scan several items.
Which scales work?#
Network (Ethernet / Wi-Fi) scales using NCI / SCP-01, Mettler-Toledo 8217, CAS or Avery Weigh-Tronix. Serial and USB scales are not read in this version.
Can BuiltPOS read deli and produce scale labels?#
Yes. Turn on Read scale-label barcodes under Scale labels in Store Settings and match your scale's label layout.
Can I use a second monitor as a customer display?#
Yes, on Windows: Customer Display → Local 2nd Monitor. Any browser on the same Wi-Fi can also be a customer display.
The customer display covers my main screen. How do I get it off?#
Press Esc three times on it. It closes and turns off.
Can customers enter their phone number for loyalty on the display?#
Yes, if the display is a touch screen: turn on Customer display is a touch screen and Show loyalty keypad on customer display.
Do I need special settings on a Sunmi register?#
Choose Sunmi Built-in as the receipt printer and set the paper width. For the built-in scanner, see Sunmi devices.
Can BuiltPOS print on the PAX terminal's printer?#
Not yet. Use a network receipt printer.
Was this helpful?
Thanks for letting us know.
Sorry it did not help. Tell us what was missing: open Help & Support in the app and choose Report a problem, or email support@builtsofthub.com.
