Labels print sideways, cut off or the wrong size

Fix Brother QL and other label printers that print sideways, cut off, blank or not at all.

TroubleshootingUpdated

Labels come out sideways or cut off#

Almost always the roll chosen in BuiltPOS and the paper set in the Brother driver don't match.

  1. Check which DK roll is in the printer (the code is on the roll's holder).
  2. In Windows Settings → Printers & scanners → your Brother printer → Printing preferences, set the paper to that roll.
  3. In BuiltPOS, Terminal Settings → Printer → Barcode / Label Printer, pick the same roll under Label stock and tap Detect from printer. It should say the driver matches.
  4. When you print and the till offers Use DK-xxxx, accept it — that is the roll the driver is set to.

A label wider than it is long prints on the paper set in the driver, so the driver setting matters most for those.

The top or bottom of the label is cut off#

On Print Barcode Labels, open Label settings and set Padding inside the label edge to Auto. Auto keeps the text and barcode inside the area the printer can really print. For your own spacing choose Custom (0–15 mm). A smaller Barcode size (XS or S) also leaves more room.

"Label printing is turned off for this till"#

Turn on the switch on Barcode / Label Printer in Terminal Settings → Printer, choose the connection and tap Save.

"Pick the label printer first"#

Detect from printer needs Connection set to System / Local Printer with the label printer selected.

"Detect works on Windows with a system label printer selected."#

Detect and the paper check only run on Windows. On other devices check the size by hand with Print test label.

"Windows has no printer with that name."#

The printer was renamed or removed in Windows. Pick it again from the list and tap Save.

"Printer refused the label size …"#

The driver will not take that label size. Set the driver's paper to the roll you loaded, or pick a size that matches.

"The label printer did not answer"#

Check the printer is on, has labels loaded and its cover is shut. For a network label printer check its IP Address and Port.

The test label size looks right but product labels don't#

Open the Print Barcode Labels page, open Label settings and check Label stock there too (it is the same setting), then tap Print test label.

Setup steps: Set up a Brother QL label printer.

Was this helpful?

Still need help?

Open a ticket from the app

In any BuiltSOFTHUB app, open Help & Support and choose Report a problem. Our replies appear under My tickets.

Email us

Write to support@builtsofthub.com. Tell us the store name and what you were doing when it happened.