Barcode scanner is not working

Fix scans that do nothing, type into the wrong field, add the wrong product or say the item is not found.

TroubleshootingUpdated

Test the scanner itself#

Open Notepad (Windows) or any notes app and scan a barcode. If the numbers appear, the scanner works and the problem is a setting. If nothing appears, check the cable, the battery, or re-pair the Bluetooth scanner.

A scan does nothing on the sale screen#

  1. Close any dialog that is open over the sale screen — a stray scan is ignored there unless the dialog is meant for scanning.
  2. Open Store Management → This Till → Terminal Settings → Barcode Scanner.
  3. For a USB scanner, turn on Enable global scan capture and tap Save.
  4. Check Terminator matches the scanner: Enter for most scanners. If scans just type into fields and nothing happens, try Tab; if the scanner sends nothing after a code, choose Timeout.

A scan adds the item twice, or types letters into a field#

Set the scanner to send its code once, followed by Enter (scan the setup code in the scanner's manual). Check Terminator again.

"Item not found" for a product you sell#

  1. Make sure the product's barcode is saved exactly as printed (with or without the leading zero).
  2. In Scan Conversion, the defaults (Convert EAN-13 → UPC-A, Convert UPC-E → UPC-A, Convert GTIN-8 → UPC-A on, Drop trailing zero off) suit US retail barcodes. If your product codes are stored in another form, ask BuiltPOS support before changing them.
  3. Products can also have alternate barcodes and group UPCs; add the extra code to the product in BuiltOFFICE.

Deli or produce labels are not read#

These are scale labels. Turn on and set up Scale labels in Store Settings — see Scales.

Sunmi built-in scanner does nothing#

Either set the device's Scanner output to keyboard, or set it to Broadcast and turn on Receive scans from the built-in scanner. If you see Could not start the built-in scanner listener on this device., use keyboard output.

The camera does not open#

The camera scanner is for iPad, iPhone and Android. Allow BuiltPOS to use the camera in the device's settings. On Windows the scan button waits for a USB or Bluetooth scanner instead.

Setup steps: Set up a barcode scanner. Till-side help: Scanner troubleshooting on the till.

Was this helpful?

Still need help?

Open a ticket from the app

In any BuiltSOFTHUB app, open Help & Support and choose Report a problem. Our replies appear under My tickets.

Email us

Write to support@builtsofthub.com. Tell us the store name and what you were doing when it happened.