Customer display problems

Fix a customer display that covers the main screen, opens on the wrong monitor, stays blank or keeps coming back.

TroubleshootingUpdated

The customer display is covering the main screen (Windows)#

Press Esc three times on the customer display. It closes and is switched off. Then open Store Management → This Till → Customer Display, pick the right screen under Display, tap Save and Open Customer Display.

Is the customer screen open? (Windows)#

With Local 2nd Monitor chosen, the Customer Display page shows the screen's state at the top:

  • Open on the customer screen — all good.
  • Opening… or Reopening the customer screen… — the till is starting it. If the customer screen stops answering, the till closes it and opens it again by itself.
  • Waiting for the customer screen to connect — the monitor is asleep, unplugged or not ready yet (common straight after a restart). The display opens as soon as the monitor appears.
  • On — opens on the customer screen when the till starts or Off.

Tap Reopen customer screen to close and open it again by hand.

The customer screen is blank or white#

While it starts, the customer screen stays dark rather than white, and it only appears once it has drawn. If it stays blank, check the state above and tap Reopen customer screen. If it says Waiting for the customer screen to connect, wake the monitor and check its cable.

It opens on the wrong monitor#

Under Display, choose the screen by number (the numbers match Windows Settings → Display), or Auto (first non-primary). The till's main screen is the monitor the BuiltPOS window is on; the customer display never opens there. Tap the refresh icon if a screen was plugged in after the page opened.

"No secondary monitor detected — opening browser URL instead."#

Windows does not see the second monitor. Check its cable and power, set Windows to Extend the display, then try again.

The browser display shows nothing#

  1. Open the address the till showed (Customer display: http://…) on a device on the same network as the till.
  2. Keep BuiltPOS open on the till — the browser display only works while the till is running.
  3. If the till's network address changed, open the display again from Customer Display to get the new address.

Android: "No external display connected"#

Plug in the HDMI / USB-C screen. With Android HDMI / External chosen, the display reopens by itself when the screen is plugged back in.

It keeps opening every time the till starts#

That is on purpose once you have opened it. Tap Turn Off at the top of the Customer Display page to stop it.

Customers can't type their phone number#

Turn on Customer display is a touch screen, then Show loyalty keypad on customer display. On a non-touch display the keypad stays hidden.

Product photos or the logo don't show#

Check Show product images is on (items without a picture never show one). For the logo, turn on Show store logo on idle screen and add a logo link or Browse from device.

Setup steps: Set up the customer display. Till-side help: Customer display on the till.

Was this helpful?

Still need help?

Open a ticket from the app

In any BuiltSOFTHUB app, open Help & Support and choose Report a problem. Our replies appear under My tickets.

Email us

Write to support@builtsofthub.com. Tell us the store name and what you were doing when it happened.