Connect tills and kitchen screens over the shop network (Store Hub)

Turn on the Store Hub on one till so kitchen displays and other terminals reach it over your shop network, approve new devices, and keep the hub secure.

How-toWorks on: Windows, iPad, AndroidUpdated

Your tills and kitchen screens always talk to each other through the internet. The Store Hub adds a second, direct path over your shop network. Kitchen tickets then arrive faster and keep flowing when the internet is down.

You only need it if you have a kitchen display or more than one terminal. A store with one till can skip it.

Turn on the hub#

Turn it on once, on the till that is always switched on and plugged in (usually the main counter till). Don't use a phone: phones sleep and drop Wi-Fi.

  1. Open Store Management → This Till → This Device. Owners and Admins go straight in. A Manager is asked for an Owner or Admin PIN.
  2. In Store Hub, turn on Host the hub on this device.
  3. The status should read Hosting or Hosting at ….

On Windows, if a message asks whether BuiltPOS may use the network, choose to allow it on private networks.

Kitchen displays and other terminals on the same network find the hub by themselves. There is no address to type in. Leave the switch off on your other tills. If another till turns it on too, it shows Another till (…) is already hosting this store's hub — this terminal connects to it instead.

Approve a new device#

When a new device asks to join the hub, it waits until you approve it:

  1. On the till that hosts the hub, open Store Management → This Till → This Device.
  2. Under Waiting for approval, find the device. It shows its role and a code.
  3. Check the code matches the one on the device's screen, then tap Approve.

To pair a kitchen display, see Pair the kitchen display.

See and remove devices#

On the hosting till, This Device → Store Hub lists:

  • Connected now: devices online right now. needs update means that device runs an older app.
  • Paired devices: every approved device. Tap Revoke to disconnect one, for example a lost tablet. It must be approved again before it can reconnect.

Encryption#

The hub encrypts everything once every device runs the current app. The status line tells you where you are:

  • Encryption: not yet required — it switches on by itself when all paired devices are up to date. It names the devices that still need an update.
  • Encryption: required — devices with an older app are refused until they are updated. They are listed under Refused — needs update.

If an old kitchen screen is refused during service, tap Allow older devices for 24 hours (manager PIN), then update that device. Require encryption again now ends the 24 hours early.

When something is wrong#

  • Two tills are trying to host — pick one. Only one till should host. Tap Make this till the hub on the one you want, then turn hosting off on the other.
  • Hosting, but this device has no usable network address… The till is not on the shop network. Check its network cable or Wi-Fi.
  • Store hub needs update — the hosting till runs an older version. Update BuiltPOS on that till. See Update BuiltPOS.
  • Hub identity changed — the hub is not the one this till knew, for example after the hosting till was reinstalled. If you trust it, tap Trust new hub (manager PIN), then approve this till on the hosting till.
  • Reset hub identity replaces the hub's security key. Use it if a device that was paired to the hub was lost or stolen. Devices that are online get the new key automatically.
  • Off. Kitchen tickets reach a KDS over the internet only. This till is not hosting and has no hub saved. That is fine on a till that is not the hub.

Was this helpful?

Still need help?

Open a ticket from the app

In any BuiltSOFTHUB app, open Help & Support and choose Report a problem. Our replies appear under My tickets.

Email us

Write to support@builtsofthub.com. Tell us the store name and what you were doing when it happened.